| The correct flow
straightener was sourced to ensure laminar air flow throw
the mass air flow sensor. This is important for proper air
flow metering at all flow levels. The flow straightener is
sandwiched between the
maf meter and
the air horn and is held in place by a retaining clip.
Carbon steel forged
flanges
ANSI
class, 150 To 2500#
Class 150, 300, 600, 900, 1500#
Size: ½” to 144”
Flanges of welding neck. Soket welding threaded blind, slip
on lap joint are in accordance with ANSI B 16.5 from 1/2” to
24 and classes 150 to 2500 (complete range)
Flanges from 26” to 48” and classes 150 to 2500 lbs and size
from ½” to 24”
Orifice flanges from 1” to 24” and from 300 to 2500 lbs are
in accordance with ANSI B 16.36
Blind, slip on, welding neck flanges are from 6 Bar to 40
Bar in accordance with DIN
Flanges from ½” to 24” and up to 450 lbs are in accordance
with BS 10 Table D & Table D & Table E, BS Table F & Table
H, BS Table J & Table K.
Flanges from 2kg to 210 kg are in accordance with JIS
Flanges according to API 605/ASME B 16.47
Depending on special purposes, flanges can be manufactured
in different shapes and sizes
|
